Scientists Have Improved the Composition of Radiation Protection Glasses

10:48, April 14, 2022

They can be used in safety chambers when working with radioactive materials

Scientists at Ural Federal University, in cooperation with foreign colleagues, have improved the radiation protection properties of glass, in particular borate (boron oxide-based glass). They introduced special additives into the basic composition of the glass - heavy metal oxides. This significantly increased the density of the material without affecting its transparency. A description of the experiments and the results of the study are presented in the Progress in Nuclear Energy journal.

Borate glasses are used in scintillation detectors of ionizing radiation (devices in nuclear physics for registration of gamma radiation and study of radiation spectra of radionuclides) and for radiation protection. Glasses based on boron oxide are an environmentally friendly alternative to glasses with the addition of lead, but have low density, which is one of the most important factors affecting the quality of radiation protection. Scientists added cadmium oxide to the composition of glass and found that in this way the density of glass has increased significantly. The new samples were suitable for use in chambers that protect against gamma radiation.

"The ability of the shielding material to attenuate passing gamma or X-rays increases with increasing cadmium concentration in the glass composition. Manufactured samples showed good results as radiation shielding material in the areas of low and medium energy gamma radiation. To confirm the validity of the results, we determined their protective properties using three methods, including the well-known Monte Carlo simulation - computer simulation of the transfer of various kinds of radiation (neutrons, gamma rays, electrons, positrons). The simulation results showed good agreement with the experimental data on the attenuation coefficients of glasses with respect to gamma radiation of cesium-137 and cobalt-60 isotopes," says Oleg Tashlykov, Associate Professor at the Department of Nuclear Power Plants and Renewable Energy Sources of UrFU.

A high level of transparency is an important prerequisite for protective glass, since such glass is used in a variety of applications. From nuclear research laboratories to the X-ray rooms of hospitals, as well as in so-called hot cells where highly radioactive products are manipulated remotely. They have to protect people from radiation, allowing them to control the necessary equipment and perform any actions at a distance.

Researchers have been selecting the optimal composition of lead-free glass for years. The main criteria are environmental friendliness and lightness (minimum lead), high radiation protection and transparency. Earlier researchers showed that partial replacement of lead with bismuth compounds leads to significant improvement of protective characteristics of glass. Now scientists are testing three more versions of compositions of glass with different additives (oxides of barium, zinc, tungsten, etc.). This is necessary in order to find the optimal composition of the material with good protective characteristics, a high level of transparency and cost-effective production.

Reference

When working with high ionizing radiation, leaded glass is now mainly used. They are produced in Japan, Czech Republic, Germany, New Zealand, Russia, etc. They are widely used when visual observation is necessary when working with radioactive materials and are installed, for example, in X-ray rooms, computer tomography rooms, laboratories, scientific and research institutes.

Glass with a high lead-oxide content provides a high degree of protection against radiation, but over time lead is released from such glass and, by penetrating into objects that come into contact with it, causes them to become contaminated. Lead accumulation in the body affects a number of systems (brain, liver, kidney, and bone system).

The news article was translated by UrFU International Marketing Office
info.international@urfu.ru, +7 (343) 375-45-19